Mileva 33 

ON BOARD

Mileva 33 ON BOARD

OGI for UNMANNED AIRCRAFT surveys

Mileva 33 ON BOARD is SENSIA’s latest model of Optical Gas Imaging (OGI) for unmanned aircraft surveys. This high-sensitivity OGI is the perfect tool for aerial detection of fugitive emissions of VOCs.

The system is provide with the RedLook ON BOARD and ground SW

Base Specifications
FPALow SWaP Cooled MWIR 640x512 with cold filter
Pixel Pitch15 μm
NETD<15mK @ +50ºC
Spectral region3.2 to 3.4 μm
Lenses18ºx13º (Other lenses available under demand)
Raw video data15 bits
Data ProtocolUSB (optional: GigE)
Camera ControlSerial (optional: Ethernet)
MDLR (for CH4)*0,35 g/h
PowerCooler: <12 W (Cooldown) / <5 W (nominal) / Electronics: 1W
VoltageCooler 8-16 VDC / Electronics: 5 VDC (USB)
Material6068 aluminum
Max. dimensions75 x 80 x 250 mm
Weight (35 mm lens)890 g
Mechanical interface1/4 '' UNC
Operating Temp. Range-10ºC to +50ºC
Storage Temp. Range-40ºC to +71ºC
Maximum relative humidity0.95
Gases Detected
MethaneCH4
Acetic AcidC2H4O2
TurpentineC10H16
BenzeneC6H6
1,3-ButadieneC4H6
ButaneC4H10
EthaneC2H6
EthanolC2H6O
Ethyl Hexyl AcrylateC11H20O2
EthyleneC2H4
Ethylene GlycolC2H6O2
EthylbenzeneC8H10
Ethylene oxideC2H4O2
MethanalCH2O
HeptaneC7H16
HexaneC6H14
MethanolCH4O
MEKC4H8
OctaneC8H18
PentaneC5H12
PhenolC6H6O
PropaneC3H8
PropyleneC3H6
TolueneC7H8
Certifications
EMC (EN 61326:2013)
IP65 (EN 60529:2018)
EPA OOOOa COMPLIANCE

Innovative capabilities assembled under a single control software

Innovative capabilities assembled under a single control software

High-sensitivity Mode

SENSIA’s Optical Gas Imaging (OGI) cameras can detect fugitive emissions of industrial gases using the high-sensitivity gas detection functionality. This feature, based on advanced image processing techniques, allows to show these invisible gases as clouds of smoke highlighted against the background scenario.

RedLook analytics is delivered for post-processing of the radiometric or compressed video acquired during the measurement campaign.

On board computer

RedLook is the software application that runs in the control computer. It is an application developed for Smart Optical Gas Imaging processing and data management for SENSIA instruments oriented to LDAR campaigns. RedLook provides advanced functionalities devoted to enhancing the detection of fugitive emissions such as different gas processing algorithms and automatic image contrast control, among a wide range of features.

This computer will oversee the image processing computing workload of the raw data provided by the OGI and will provide the thermal image streaming via RTSP protocol to the control computer. Additionally, it is devoted to power the detector and electronics of the OGI and to provide the back-up storage. This computer will include a software for video acquisition/processing and OGI management that will run the gas detection algorithms for an increased gas sensing performance. This software will also perform recordings of the OGI camera according to ground computer commands.

RedLook will show the video streaming with the running algorithms and the metadata of the OGI and will communicate it with third-party systems using RTSP or ONVIF protocols.