Industrial fire detection2019-09-10T14:15:11+00:00

RedLook “Fire detection” is the most reliable tool for fire anticipation (by intelligent thermography) and early warning of fire.

Fire detection spec by sensitivity level

RedLook “Fire detection” is the most reliable tool for fire anticipation (by intelligent thermography) and early warning of fire.

Advantages vs :

Single point detectors
  • Larger FoV increasing the area under surveillance

  • Higher detection Probability > 98%

  • Higher detection ranges

  • Ultra low false alarm rate < 0,00001% (immune to solar glints)

  • Lower alarm time (few seconds from ignition)

  • Sensitive to any Fire Type

  • Fire location on image.

Vision cameras
  • No influence of visibility conditions (same performance at day, night and dense fog)

  • Non-smoke flames detection

  • Much higher reliability (detection probability, False alarm rate and response time)

Advantages VS single point detectors
  • Larger FoV increasing the area under surveillance

  • Higher detection Probability > 98%

  • Higher detection ranges

  • Ultra low false alarm rate < 0,00001%

  • Fire location on image.

  • Common cases of use: forest fires, petrochemicals, landfills, recycling plants, critical infrastructures…

Fire detection performance

This chart shows the distance from which each size of flame can be detected by each of the field of view configurations available for the different interchangeable lenses available for the SENSIA's cameras.

Fire detection performance

Flame Detection ranges per FoV and per Flame size

Fire detection spec by sensitivity level

Immunity to False Alarms

  • Solar Glints, direct o reflected

  • Lamps (incandescent, Fluorescents, Quarz, etc.)

  • Hot points, components or areas

  • Incandescent bodies

  • Weldings

  • LED’s screens

  • Radiation Heaters

  • Hot exhaust plumes

Compatible products

FIRE PROCESSING SPECIFICATIONS2019-03-05T10:18:39+00:00
Low Medium High Long range
Minimum size 9 x 9 pixels 7 x 7 pixels 4 x 4 pixels 3 x 3 pixels
Range < 200 m < 200 m < 200 m < 200 m
Warning time < 4 s < 6 s < 20 s < 30 s
FIRE PERFORMANCE SPECIFICATIONS2019-03-05T10:18:39+00:00
FOV /FLAME SIZE 0,1 m x 0,1 m 1 m x 1 m 3 m x 3 m 6 m x 6 m
31º x 23º 39 m 392 m 1176 m 2353 m
18º x 13º 69 m 686 m 2059 m 4118 m
12º x 9º 98 m 980 m 2941 m 5882 m
6º x 5º 216 m 2157 m 6471 m 12941 m

This chart shows the distance from which each size of flame can be detected by each of the field of view configurations available for the different interchangeable lenses available for the SENSIA’s cameras.

Download the RedLook Brochure

Let us find a solution

Contact us

Let us find a solution

Contact us